Wireless Systems

Jack to Jack leads for connecting the Line 6 Relay G30 to your instrument. The cable used is the thin and flexible Van Damme Pro-Patch Lite. Use the options below to customise you cable

3 pin mini female XLR to Neutrik gold plated 1/4" jack with flexible Van Damme XKE cable. This lead will work with AKG WMS40, PT40, PT400, X-Wire 905 & Samson bodypacks

Van Dammes XKE unbalanced Pro-Patch cable terminated with a  3.5mm Screw down Mini Jack and a Neutrik Gold plated ¼” jack connector. Designed with signal quality and durability in mind.

Van Damme cables offer excellent sonic performance and with a lapped copper screen will keep the unwanted noise to a bare minimum. The anti kink PVC jacket makes these leads very flexible with no memory.

4 pin mini female XLR to Neutrik gold plated 1/4" jack with flexible Van Damme XKE cable. This lead will work with Line 6 G50 and G90, Shure, LD, Rocket and Ashdown Freebass bodypacks

A high quality Sennheiser mini-to-male XLR audio output replacement cable to be used with EW500 series camera-mountable receiver systems only. The CL500 is a balanced cable that is designed to connect the output of the EK500 receivers to the XLR audio input of a video camera.

4 pin mini female XLR (with locking nut) to Neutrik gold plated 1/4" jack with flexible Van Damme XKE cable. This lead will work with Peavey and Shure GLXD bodypacks.

A high quality upgrade lead for Sennheiser CL100 radio microphone receiver; EK100 EK300 EK500 G1 G2 G3. This is an unbalanced lead. The cable is terminated with a JP3569 Sennheiser locking mini jack and a Neutrik NC3MXX-B Male XLR. Both have excellent cable retention for a lead that will last.

A high quality lead for Sennheiser radio microphone transmitter; SK 100 SK 300 and SK 500. Please note this is not to be used on the receiver output. A great solution for situations where line signals from an XLR source feed into the line input preamp of the bodypack transmitter.

A high quality lead for Sennheiser radio microphone transmitters; SK 100 SK 300 and SK 500.

Switchcraft Locking (screwdown) Mini jack to Neutrik Gold Plated 1/4" Jack with flexible Van Damme XKE cable. This lead will work with Line 6 X2 and Sennheiser EW G1 G2 G3 Evolution Beltpacks

Van Dammes XKE unbalanced Pro-Patch cable terminated with a Switchcraft 3.5mm Screw down Mini Jack and a Neutrik Gold plated ¼” jack connector. Designed with signal quality and durability in mind. This lead will work with Sennheiser Freeport Wireless System.

A high quality upgrade lead for Sennheiser CL100 radio microphone receiver; EK100 EK300 EK500 G1 G2 G3. This is an unbalanced lead. The cable is terminated with a Switchcraft 35HDLBAUS locking mini jack and a Neutrik NC3MXX-B Male XLR. Both have excellent cable retention for a lead that will last. Van Damme cables offer excellent sonic performance and keep the unwanted noise to a bare minimum. The anti kink PVC jacket makes these leads very flexible with no memory.

**Please note that this cable is not for use with Microphones. This is a line input cable. Please click HERE for the CM1 that will work with microphones**. A high quality lead for Sennheiser radio microphone transmitter; SK 100 SK 300 and SK 500. A great solution for situations where line signals from an XLR source feed into the line input preamp of the bodypack transmitter. Van Damme cables offer excellent sonic performance and keep the unwanted noise to a bare minimum. The anti kink PVC jacket makes these leads very flexible with no memory.

4 Pole Locking (push down and twist) connector to Neutrik Gold Plated 1/4" Jack with flexible Van Damme XKE cable. This lead will work with Audio Technica AT-GCW beltpacks