Y Splitter Leads

This unique cable has been designed specifically for plugging portable devices such as phones/tablets/mp3 players in to TT Bantam inputs (patchbays etc...)

The cable takes the stereo signal from the auxiliary and splits this in to 2x separate mono signals. Made using the highest of quality components so this is a cable you can trust to last a long time!

Made using Sommer Peacock, Neutrik TT Bantams and Switchcraft Min-Jacks.

A clever cable that can either duplicate or sum a balanced or stereo signal. The signal is duplicated onto both 1/4" TRS sockets. If you are unsure about what you need please ask.

A cable that splits a balanced Female XLR into 2x identical balanced female TRS Jack sockets. For example; these can be used to split the output of a microphone into 2 extension sockets. Please note that this is a balanced lead, not stereo.

A cable that sums together 2 balanced 1/4" TRS Jack Sockets into one single male XLR. For example; using as a short adapter lead for summing the output of a mixer Left/Right into a single balanced input of a power amp. Please note that this is a balanced lead, not stereo.

Balanced stereo lead used for connecting stereo mics to recorders & mixing desks. A common mic is the Rode NT4. The 5 pin XLR is split out into two separate male XLRs so each mic can be recorded separately. The Male XLRs are marked as left and right with a red boot. The peacock cable is super soft and flexible.

Dual balanced Female XLR out's that are combined into one 5 pin Male XLR. This allows 2 independent channels to run into a single 5 pin XLR, saving space and cabling.

Hardwearing leads ideal for splitting a stereo mini jack into Left & Right. For example; connecting the output of an iPod or computer to an amplifier, home cinema system or mixing desk. Or vice versa; connecting the Left & Right RCA output of a Mixing desk or the Pre-Out of an amplifier to a computer or recorder. 

Hardwearing leads ideal for splitting a stereo mini jack into Left & Right. For example; connecting the output of an iPod or computer to an amplifier, home cinema system or mixing desk. Or vice versa; connecting the Left & Right output of a mixing desk to a computer or recorder.

Hardwearing leads ideal for splitting a stereo mini jack into Left & Right. For example; connecting the output of an iPod or computer to an amplifier, home cinema system or mixing desk. Please note this is a stereo lead not balanced.

Hardwearing leads ideal for summing two mono XLR outputs into one 3.5mm mini jack. For example; connecting the Left & Right output of a mixing desk or device into the single 3.5mm mini jack input on a computer or recorder. Or; connecting two microphones into the single 3.5mm mini jack input on a computer or recorder. Please note this is a Stereo lead NOT a balanced lead.

A high quality lead made using tough components; a Switchcraft 3.5mm Mini Jack and Flexible Sommer Peacock cable. The cable is designed to duplicate the stereo signal coming from your device; iPod, iPad, Smart phone etc. This then enables you to connect two sets of headphones or alternatively any recording device/monitoring system.

High Quality components from Neutrik and Sommer. Ideal for splitting un-balanced signal lines into two. For example, splitting the output of your guitar/instrument

This is a High quality signal lead that will connect any device with a Stereo (TRS) jack output that needs to be split into two independent mono/unbalanced signals, Left/Right, Send/Return, Tip/Ring. So making it the ideal solution for ‘Insert leads’, ‘Stereo Guitar Leads’ and ‘Splitter Leads’.

This is a High quality signal lead that will connect any device with a Stereo (TRS) jack output that needs to be split into two independent mono/unbalanced signals, Left/Right, Send/Return, Tip/Ring. So making it the ideal solution for ‘Insert leads’, ‘Stereo Guitar Leads’ and ‘Splitter Leads’.

High Quality components from Neutrik and Sommer. Ideal for splitting un-balanced signal lines into two. For example, splitting the output of your instrument.

Quality components from Rean and Sommer. Ideal for splitting un-balanced signal lines into two. For example, splitting the 'line out' of your amplifier into two different inputs.

A clever cable that can either duplicate or sum a balanced or stereo signal. If you are unsure about what you need please ask.

This is a High quality signal lead that will connect any device with a Stereo (TRS) jack output that needs to be split into two independent mono/unbalanced signals, Left/Right, Send/Return, Tip/Ring. So making it the ideal solution for ‘Insert leads’, ‘Stereo Guitar Leads’ and ‘Splitter Leads’.

This is a High quality signal lead that will connect any device with a Stereo (TRS) jack output that needs to be split into two independent mono/unbalanced signals, Left/Right, Send/Return, Tip/Ring. So making it the ideal solution for ‘Insert leads’, ‘Stereo Guitar Leads’ and ‘Splitter Leads’.

This is a High quality signal lead that will connect any device with a Stereo (TRS) jack output that needs to be split into two independent mono/unbalanced signals, Left/Right, Send/Return, Tip/Ring. So making it the ideal solution for ‘Insert leads’, ‘Stereo Guitar Leads’ and ‘Splitter Leads’.

Quality components from Rean and Sommer. Ideal for splitting un-balanced signal lines into two. For example, splitting the 'line out' of your amplifier into two different inputs.

A cable that splits a balanced Female XLR into 2x identical balanced TRS Jacks. For example; these can be used to connect the mono/balanced output of a mixer into the left/right input of a power amp. Please note that this is a balanced lead, not stereo.

Quality components from Rean and Sommer. Ideal for splitting un-balanced signal lines into two. For example, splitting the 'line out' of your amplifier into two different inputs.

Quality components from Rean and Sommer. Ideal for splitting un-balanced signal lines into two. For example, splitting the 'line out' of your amplifier into two different inputs.

A high quality unbalanced lead that sums together 2x female XLRs into one stereo 1/4" TRS jack. The Female XLR with the red boot is wired to the 'Ring' of the TRS Jack. The black XLR is wired to the Tip. This is a Stereo lead NOT a balanced lead.

A high quality lead that splits a 1/4" stereo jack into dual mono male XLRs, 'Left & Right'. Please note this cable is not balanced. These leads work extremely well when used with stereo guitars to split the pickups onto separate channels.

An insert lead wired 'TIP SEND'. Sends and returns a signal into the insert point of a mixing desk.

An insert lead wired 'RING SEND'. Sends and returns a signal into the insert point of a mixing desk.

A cable that sums together 2 balanced Female XLRs into one single balanced 1/4" TRS Jack. Ideal for summing the output of a mixer Left/Right into a single balanced input. These are commonly used with the Boss L1 system.

A cable that splits a balanced 1/4" TRS jack into 2x identical balanced male XLRs. For example; these can be used to connect the mono/balanced output of a mixer into the left/right input of a power amp. Please note that this is a balanced lead, not stereo.