You have no items in your shopping cart.


Professional Cables for Professional People.

0115 922 5660
Shipping to United States. Change

More Views

Neutrik 3 Pin NC3FXX-EMC Female XLR Connector

  • Buy 10 for £9.10 each and save 10%
  • Buy 20 for £8.71 each and save 13%
  • Buy 50 for £8.34 each and save 17%
  • Buy 100 for £8.01 each and save 20%

Quick Overview

Gives enhanced RF screening when there are particular problems with radio transmission or mobile phones.

Availability: In stock

Check Prime Stock
Ship to: Worldwide




3 pole female EMC-XLR cable connector


The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with radio transmission or mobile phones. The design guarantees a continuous RF shield connection from the cable to the chassis connector housing via a circular capacitor around the cable shield. The circular capacitors act as high-pass filter with a cut-off frequency around 10 MHz.

An EMI suppression ferrite bead with 24 Ohm at 1 MHz between pin 1 and the cable screen provides a low-pass filter for improved RF rejection.


Features & Benefits

  • 3 pole male and female XLR cable connector with integrated capacitive shield to shell connection
  • Circular capacitor around the cable shield enables low-inductive shield connection to connector housing
  • Female connector with circumferential ground spring providing an accurate connection to the mating shell
  • Cable shield - Pin 1 connection includes EMI suppression bead to block high frequencies
  • Avoid ground loops as there is no LF-shield connection to ground
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product



Capacitance between contacts - ≤ 4 pF

Contact resistance - ≤ 3 mΩ (inner)

Dielectric strength - 1,5 kVdc

Insulation resistance - > 10 GΩ (initial)

Rated current per contact - 5 A

Rated voltage - < 50 V



Cable O.D. - 3.5 - 8.0 mm

Insertion force - < 50 N

Withdrawal force - < 20 N

Lifetime - > 1000 mating cycles

Wiresize - max. 0.75 mm²

Wiresize - max. 20 AWG

Wiring - Solder contacts

Locking device - Latch lock



Boot - Polyurethan

Contact plating - 0.2 µm Au hard alloy over 2 µm Ni

Contacts - Bronze (CuSn8)

Insert - Polyamide (PA 6.6 30 % GR)

Locking element - Zinc diecast (ZnAl4Cu1) / Ck 67 (spring)

Shell - Zinc diecast (ZnAl4Cu1)

Shell plating - Nickel

Strain relief - Polyacetal (POM)

Circumferential ground spring - Bronze (CuSn6), Ni plated



Flammability - UL 94 HB

Standard compliance - IEC 61076-2-103

Protection class - IP 40

Solderability - Complies with IEC 68-2-20

Temperature range - -30 °C to +80 °C

Additional Information

Connector Type XLR
Mains Connector Type No
Manufacturer Neutrik
Housing Type N/A
Metal Type.... Gold Plated
Poles 3 Pole
Current Rating (amps) N/A
Works with.... No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.