Neutrik NA2MP 3 Pin XLR Male to Mono 1/4 Inch Jack Plug. Audio Adaptor Convertor
- Buy 5 for £9.48 each and save 4%
- Buy 10 for £9.36 each and save 5%
- Buy 20 for £8.87 each and save 10%
- Buy 50 for £8.37 each and save 15%
- Buy 100 for £7.88 each and save 20%
3 pole XLR male – Mono 1/4" plug (tip, sleeve contact)
.jpg)
3 pole XLR male – Mono 1/4" plug (tip, sleeve contact)
Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground
Features & Benefits
• Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems
• Professional look and compact space saving design, based on the X Series (XLR worldwide accepted standard)
• Rugged diecast shell for best reliability.
Technical Information
Electrical
Contact resistance - ≤ 3 mΩ (XLR)
Contact resistance - ≤ 6 mΩ
Dielectric strength - 1.5 kV dc / > 1 kVdc (XLR/Plug)
Insulation resistance - > 2 GΩ
Mechanical
Wiring - according to IEC 268-12 pin 2 = signal, pin 1 and 3 connected to ground
Locking device - Latch lock
Material
Contact plating - 2 µm Ag over 2 µm Ni
Contacts - Brass (CuZn39Pb3) (plug)
Insert - Polyamide (PA 6.6 30 % GR)
Shell - Zinc diecast (ZnAl4Cu1)
Shell plating - gal Cu/Ni
Environmental
Temperature range - -20 °C to +65 °C
| Connector Type | XLR |
|---|---|
| Manufacturer | Neutrik |
| Metal Type.... | Silver Plated |
