3.5mm Mini Jack Leads

A digital 75ohm Coax cable, manufactured using Mogami's impressivly thin and flexible 2964 sub-miniature coaxial audio & video cable.

Learn More

Suitable for; Mutable Instruments, Intellijel, Make Noise, Cwejman, Erica Synths, Doepfer, ALM Busy Circuits, Xaoc Devices

Learn More

This unique cable has been designed specifically for plugging portable devices such as phones/tablets/mp3 players in to TT Bantam inputs (patchbays etc...)

The cable takes the stereo signal from the auxiliary and splits this in to 2x separate mono signals. Made using the highest of quality components so this is a cable you can trust to last a long time!

Made using Sommer Peacock, Neutrik TT Bantams and Switchcraft Min-Jacks.

Learn More

Designed to last, these designacable Custom Shop braided synth patch cables use only the toughest components to ensure a long-lasting lead, even in the harshest of conditions. We're so confident in these cables that we're offering a lifetime warranty on the entire range!

Handmade in Nottingham, UK, using components from industry standard brands Van Damme & REAN and reinforced with a heavy duty coloured Plyosil braiding, not only do these cables look great they also make for extremely tough little patch leads, guaranteed to last.

Learn More

This is a Pro quality lead designed to take the stereo signal from an iPod or similar device and send it to a single balanced Male XLR input of a mixing desk, camera, recorder etc. The Left and Right channels will be summed together.

 

Learn More

This is a Pro quality lead designed to take the stereo signal from an iPod or similar device and send it to a single balanced Male XLR input of a mixing desk, camera, recorder etc. The Left and Right channels will be summed together.

 

Learn More

Learn More

Flexible and durable leads for connecting your stereo device such as an iPod to a single XLR input on a mixing desk, active monitor etc. The cable sums together the stereo signal into one mono signal line.

Learn More

Retro looking leads for connecting your stereo device such as an iPod to a single XLR input on a mixing desk, active monitor etc. The cable sums together the stereo signal into the XLR.

Learn More

A high quality lead made using tough components; a Switchcraft 3.5mm Mini Jack and Flexible Sommer Peacock cable. The cable is designed to duplicate the stereo signal coming from your device; iPod, iPad, Smart phone etc. This then enables you to connect two sets of headphones or alternatively any recording device/monitoring system.

Learn More

This is a Pro quality lead wired to take the signal from a microphone or output device and split it onto both the Left and Right channels of the mini jack. The 3.5mm mini jack will fit into DSLR cameras, portable recorders, laptop or PC inputs, etc. Please be advised that this is not a balanced lead, this is a stereo lead, and will not function with microphones that require Phantom Power to operate.

Learn More

These are tour grade components from Van Damme and Neutrik. Van Damme cable is used extensively by Abbey Road Studios and the BBC and utilises Ultra Pure Oxygen Free Copper to carry the signal and a lapped copper outer screen. Neutrik connectors are the bench mark of quality in the Pro-Audio market, you will not find better.

Learn More

Flexible and durable leads for connecting your stereo device such as an iPod to a single TRS Jack input on a mixing desk, active monitor etc. Made using high quality Switchcrafts Silver Mini Jack, Neutriks TRS 1/4" Jack, terminated on Sommer's Vintage yellow tweed microphone balanced cable.

Learn More

A highly versatile lead capable of carrying audio or control signals. Utilising a flexible cable from Van Damme this lead will carry small DC control voltages between devices or mono, unbalanced audio signals.

Learn More

A top quality lead for extending the reach of your headphones to your iPod or device. Comprising of a female 3.5mm jack socket going to a male 3.5mm Jack wired for stereo use. The cable is very flexible with a tough neoprene jacket.

Learn More

This is a Pro quality lead wired to take the signal from a microphone or output device and split it onto both the Left and Right channels of the mini jack. The 3.5mm mini jack will fit into DSLR cameras, portable recorders, laptop or PC inputs, etc. Please be advised that this is not a balanced lead, this is a stereo lead, and will not function with microphones that require Phantom Power to operate.

Learn More

A high quality stereo aux cable for connecting devices such as iPods, iPads, iPhones to the ‘Aux Inputs’ of Radios, Amplifiers, Car Stereo’s, etc.

Learn More

This high quality lead adapts a stereo mini jack into a ¼” Stereo jack or vice versa. Van Dammes ultra thin Pro Patch Lite Cable, REANS TRS Gold Plated Mini Jack, Neutriks TRS Stereo 1/4" Jack.

Learn More

A extremely high quality cable designed specifically for use with your portable devices when they are protected with bulky cases.

Learn More

A quality lead made from quality components. Available in 10 different cables choices and a variety of lengths. This lead is wired for ‘playback’, so compatible playing an iPod or similar device into an amplifier that uses Audio Din for the input. Designed specifically for Quad amplifiers with 5-Pin DIN Aux Inputs. The 5 Pin Din is wired 3 + 5 for playback.

Learn More