Mains Connectors

Good quality general purpose fuses available in all sizes, 3A, 5A, 10A, 13A. These work in domestic plug tops and in mains powered devices that have an additional fuse holder for protection.

Standard plug tops from MasterPlug, available in black and white. Please select the options below. Fitted as standard with 13amp fuses. The pins are sleeved and are extruded from solid brass with brass slotted head terminals. The plug allows for a maximum cable conductor size of 1.5mm. The cable entry accepts H07RR-F and PVC cables up to 3x1.5mm

Tough plugs made from hard rubber available in 3 colours, Black, White and Orange. Please select the options below. The pins are sleeved and are extruded from solid brass with brass slotted head terminals. The plug allows for a maximum cable conductor size of 2.5mm. The cable entry accepts H07RR-F and PVC cables up to 3x2.5mm.

Professional sockets made from hard rubber available in 3 colours; Black, White and Orange and in 1, 2 and 4 gang variations. Please select the options below. These are easily assembled / rewired with no special tools required and have a chunky solid cable entry guard for safety. The 4 gang variation has an indicator LED for when the power is ‘on’.

Quality German made 2 pin plug that can be used in Germany, France, Spain, Belgium, Netherlands, Austria, Portugal, Greece, Sweden, Norway, Finland + more. These are made from Hard plastic and have a reliable cord grip inside the plug. The cable entry can accept H05, H07 and PVC cables up-to 3x1.5mm. The earth connection inside the plug is a robust screw type connection.

The PCE SHARK series is state-of-the-art in power distribution: extremely robust in design, fine-mechanically and ergonomically designed and is available in 16 and 32 Amp with 3, 4 and 5 pole versions. The PCE Shark series is designed to meet all application requirements.

The PCE SHARK series is state-of-the-art in power distribution: extremely robust in design, fine-mechanically and ergonomically designed and is available in 16 and 32 Amp with 3, 4 and 5 pole versions. The PCE Shark series is designed to meet all application requirements.

A basic 1.7mm DC plug with a 4mm plastic outer and 11mm length. The finish is nickel plated with a yellow tip. Solder type termination.

The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Schurter are a renowned brand providing high quality mains connectors made from tough black Thermoplastic. They have screw-type terminals inside the connectors and durable cable retention. These are industry standard products.

Appliance inlet connector, 1/4'' flat tab terminals The powerCON TRUE1 is a locking 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

The PCE SHARK series is state-of-the-art in power distribution: extremely robust in design, fine-mechanically and ergonomically designed and is available in 16 and 32 Amp with 3, 4 and 5 pole versions. The PCE Shark series is designed to meet all application requirements.

The PCE SHARK series is state-of-the-art in power distribution: extremely robust in design, fine-mechanically and ergonomically designed and is available in 16 and 32 Amp with 3, 4 and 5 pole versions. The PCE Shark series is designed to meet all application requirements.

Schurter are a renowned brand providing high quality mains connectors made from tough black Thermoplastic. They have screw-type terminals inside the connectors and durable cable retention.

These are industry standard products.

Schurter are a renowned brand providing high quality mains connectors made from tough black Thermoplastic. They have screw-type terminals inside the connectors and durable cable retention.

These are industry standard products.

Schaffner power connector with IEC lock guard against accidental disconnection of all electrical appliances with an IEC inlet. No exchange or modification of the IEC inlet or IEC inlet filter system is needed. Easy retrofit for all electronic equipment’s and devices.

Professional sockets made from ABS material available in 4 and 6 gang variations. Please select the options below. These are easily assembled / rewired with no special tools required and have a chunky solid cable entry guard for safety. Both variations have an indicator LED for when the power is ‘on’ and an overall switch allowing on/off control of all sockets outlets at once.

These are a basic re-wireable figure 8 connector.

The cable entry is small so we recommend that adhesive lined heat shrink is used over the connectors and cable once assembled to provide safety and durability.