Male XLR to 6.35mm TRS Stereo Jack Cable. Balanced Mixer Interface Monitor Lead

Studio and Tourgrade TRS (6.35mm, 1/4") Jack to Male XLR cables made using foxTWO cable and Seetronic connectors. Suitable for use with balanced devices such as; Mixing desk to Active Monitors, Mixing Desk to Interface, Effects, HiFi, DJ Mixers, Amplifiers, Di-Boxs...... etc........ etc.

foxTWO is a 2 core and screen cable, designed to handle touring-life but is perfectly at home in the studio. The conductors are a blend of silver plated and ultra-pure copper delivering a low resistance path and linear sound. To minimise microphonics the conductors are tightly packed into the jacket and are surrounded with cotton fillers. Loose conductors will move around and rub against each other, this causes static that manifests itself as crackle and noise. The outer jacket is made from a neoprene composite that is tough, flexible and easy to coil.

Seetronics classic looking connectors use rugged 'chuck type' cable strain relief along with a tough polyurethane boot and metal casing. Simplicity is key when it comes to connector assembly, these have 4 integral parts that lock together when assembled and bite down on to the cable to ensure a rock-solid termination that will not come un-stuck without disassembly. Seetronic represent excellent value for money.

Low-resistance, stable impedance, tight construction, and average capacitance values mean this cable is 'transparent' and 'Noise-Free' so will do nothing to your sound other than transfer it between devices.

• foxTWO 1 Pair and Screen Cable (5 colours available)
• Overall Diameter - 6.4mm
• Mixed Pure and Silver-Plated Copper Conductors - 24awg
• Spiral Copper Shield
• Resistance 85ohm p/km
• Capacitance 102pf per meter (core to screen)
• Seetronic MP3X (6.35mm, 1/4", TRS) Jack and SCMM3 Male XLRs
• Cables 3m or more come with a sturdy cable tie
• Manufactured with a 3.5% silver solder