The 4 Cable Method Loom - Including TRS Channel for Amp Switching

If you are using the 4 cable method these hand-made looms are the pro-choice for keeping a tidy setup. Despite being called the 4-cable method, the looms have 3 signal cables (the 4th cable in the method connects the Guitar to Pedal Board) The 4th cable in these looms is for channel switching. If you do not require channel switching, then checkout our 3 channel looms in the related products below.

All our looms are Hand-Made to order so can be customised to suit your setup. Standard tails lengths are 50cm, these can be easily adjusted to suit, and if you need a bit of extra length to get around the back of your amp, no problem. We can customise the jacks, and we can also swap out the TRS switching jacks for 5 Pin DINs. Just ask.

Each channel is labelled at both sides with; FX Send / FX Return / GTR Out / Switch

• Straight to Right-Angle Neutrik Black & Silver Jacks
• Techflex FlexoPET Braiding
• Van Damme XKE Cables (Neon Pink uses FOX Cables)
• Instrument Cable Capacitance - Core to shield pF/m <90
• Overall Diameter of Loom - 17mm
• Standard tail lengths are 50cm, at both sides