Neutrik 3 Pin 110ohm Digital NC3FXCC Female XLR Connector

NC3FXCC

3 pole female cable connector, RF-protected, gold contacts

Cable O.D.: 5.4 - 6.2 mm
Crimp Size Shield: 6.5 mm (hex)

The XCC XLR cable connector Series  with circumferential shield contact provides excellent RF-protection to transmit digital audio signals most efficient and reliable. This XLR features a coaxial ground spring and a coaxial hex crimp ferrule at the cable entrance for proper and reliable transition of the shield to the shell.

Features & Benefits

• 3 pole cable connector with a circumferential shield contact for best EMI protection
• XCCR coding ring to indicate digital AES signals included
• Rugged zinc diecast shell, long lasting and durable
• Chuck type strain relief system for secure clamping of cables
• Boot with rubber gland gives high protection against bending stresses

Electrical

Capacitance between contacts - ≤ 4 pF

Contact resistance - ≤ 3 mΩ (inner)

Dielectric strength - 1,5 kVdc

Insulation resistance - > 10 GΩ (initial)

Rated current per contact - 16 A

Rated voltage - < 50 V

Shielding effectiveness - > 55 dB @ 1.3 GHz

Mechanical

Cable O.D. - 5.4 - 6.2 mm

Crimp size - 6,47 Hex crimp (shield) acc. IEC 60803 (die designation E)

Insertion force - ≤ 20 N

Withdrawal force - ≤ 20 N

Lifetime - > 1000 mating cycles

Wiresize - max. 2.5 mm²

Wiresize - max. 14 AWG

Wiring - Solder contacts

Locking device - Latch lock

Material

Boot - Polyurethan

Coding Ring - PA 6 15% GR

Contact plating - 0.2 µm Au hard alloy over 2 µm Ni

Contacts - Bronze (CuSn8)

Crimp ferrule - CuZn39Pb3, Ni plated

Insert - Polyamide (PA 6.6 30 % GR)

Locking element - St3K32 (latch) / Ck 67 (spring)

Shell - Zinc diecast (ZnAl4Cu1)

Shell plating - Nickel

Strain relief - Polyacetal (POM)

Circumferential ground spring - CuSn6, Ni plated

Environmental

Approvals - UL

Flammability - UL 94 HB

Standard compliance - IEC 61076-2-103

Protection class - IP 40

Solderability - Complies with IEC 68-2-20

Temperature range - -30 °C to +80 °C