Neutrik 5 Pin NC5FXX-B Female XLR Connector

NC5FXX-B

5 pole female cable connector with black metal housing and gold contacts.

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features & Benefits

• Unique cage design of female contact for low contact resistance and high integrity
• Female contact incorporates a solder barrier to prevent solder running into the contact mating area
• Female connector with improved solid metal latch which is larger and easier to handle
• Additional ground spring contacts for better shell ground continuity
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland gives high protection to cable bending stresses
• Colored rings and boots available for coding or identification
• Sleek and ergonomic design - valuable and handy
• Rugged zinc diecast shell, longlasting and dependable
• Internal thread on shell is well protected against any damage
• Branded with unique hologram - guarantees genuine and authentic Neutrik product

Electrical

Capacitance between contacts - ≤ 7 pF

Contact resistance - ≤ 3 mΩ (inner)

Dielectric strength - 1,5 kVdc

Insulation resistance - > 10 GΩ (initial)

Rated current per contact - 7,5 A

Rated voltage - < 50 V

Mechanical

Cable O.D. - 3.5 - 8.0 mm

Insertion force - ≤ 20 N

Withdrawal force - ≤ 20 N

Lifetime - > 1000 mating cycles

Wiresize - max. 1.0 mm²

Wiresize - max. 18 AWG

Wiring - Solder contacts

Locking device - Latch lock

Material

Boot - Polyurethan

Contact plating - 0.2 µm Au hard alloy over 2 µm Ni

Contacts - Brass (CuZn39Pb3)

Insert - Polyamide (PA 6.6 30 % GR)

Locking element - Zinc diecast (ZnAl4Cu1) / Ck 67 (spring)

Shell - Zinc diecast (ZnAl4Cu1)

Shell plating - Black chromium

Strain relief - Polyacetal (POM)

Environmental

Flammability - UL 94 HB

Standard compliance - IEC 61076-2-103

Protection class - IP 40

Solderability - Complies with IEC 68-2-20

Temperature range - -30 °C to +80 °C