Sennheiser CM1 XLR Replacement Cable. Microphone. Transmitter. SK 100 300 500
A high quality lead for Sennheiser radio microphone transmitters; SK 100 SK 300 and SK 500.
A high quality lead for Sennheiser radio microphone transmitters; SK 100 SK 300 and SK 500. A great solution allowing you to feed a microphone signal into the mic input preamp of the bodypack transmitter. The cable is terminated with a Switchcraft 35HDLBAUS locking mini jack and a Neutrik NC3FXX-B Female XLR. Both have excellent cable retention for a lead that will last. Van Damme cables offer excellent sonic performance and keep the unwanted noise to a bare minimum. The anti kink PVC jacket makes these leads very flexible with no memory.
*This cable is only designed to work with microphones. Please see the link below for the CL2 that will work with
‘Line Input’ signals.
*This cable is not to be used on the receiver output.
*This cable will not supply 48v Phantom Power to Condenser microphones.
*This cable is not balanced.
|Cable Capacitance||<90 pF/m|
|Cable Resistance||47 Ohm/Km|
|Cable Conductor||Bare silver plated UPOFC wire|
|Cable Jacket||Flexible PVC/Neoprene composite|
|Metal Type....||Gold Plated|