LMR240 Equivalent BNC Antenna Cable. 50 ohm Black. Jumper Assemblies
Multibuy discounts calculated at checkout
Quality 50ohm BNC cable for Antennas
LMR240 Equivalent 50ohm cable for Antennas. This cable has a tough PVC jacket, 1.4mm centre core, braided tinned copper shield and aluminium tape for 100% screening factor. It has a foamed Polyethylene (PE) dielectric which provides excellent stability for the signal and high crush resistance
Cables should always be kept as short as possible. Do not use a 50m cable for a 5m run! As coiling the excess cable will affect the performance.
- Flexible low loss communications coax
- True 50ohm Turned BNC connectors
- Strain relief boot available in 10 colours
| Delivery Speed | Next Day delivery available if 'In Stock' |
|---|---|
| Cable Capacitance | 79.4 pF/m |
| Cable Resistance | Impedance = 50 ohms |
| Cable Conductor | Inner Conductor Solid Bare Copper 1.42mm (0.056 in) |
| Cable Screening | Outer Conductor = Aluminum Tape / Overall Braid = Tinned Copper |
| Cable Jacket | Black PVC |
| Overall Diameter | 6.1mm |
| Cable Brand | designacable |
| Application | Tour & Studio Grade |
| Number of Contacts | 2 Pole |













