Type 2 Plug to Type 1 EV Charging Cable

N.B. Please note that all cables over 45m will need to be confirmed and are made to order, we do not keep these on the shelf. As max charging amperage will be dropped to 16Amps, to allow for voltage drop over the length of the cable. Please email [email protected] before placing your order.

This cable is fitted with a Type 2 plug that allows you to connect to most (if not all) UK and European charging stations. The vehicle connector is a Type 1, these are common in North America & Japan, and on older vehicle models in the UK and Europe. This adapter cable allows you to seamlessly interface between Type 2 and Type 1. Using our VIPER cable you can charge up to 7.4kw, the fastest charge speed you can achieve with a vehicle fitted with a Type 1 input.

Features

• Made in Nottingham UK
• Choose from 25cm to 100m cable length
• Solid Latching Mechanism
• Single Phase up to 32amps (7.4kW) @ 230v/240v
• Flexible and UV stable cable
• Integral cable strain relief for maximum durability
• Resin filled connectors eliminates water ingress and offers unrivalled cable retention
• Cable and connector can withstand being run over
• Complimentary canvas carry bag included

Standards

• Type 1 (J1772) Connector. According to IEC 62196-2 & SAEJ1772
• Type 2 Socket. According to IEC 62196-2
• H07BZ5-F Cable. 3core 6mm² (L,N,E) + 0.5 mm² (CP). According to IEC 62893
• Assembly and Testing. According to IEC 62196-1
• IMDS registered
• UKCA & CE Certified

Technical Specification

• IP Protection Class: IP55 when connected
• Connector housing: Thermoplastic
• Max 32amp Rated (7.4kW) (operates fine with 16amp charge points)
• Operating Temperature: -30℃ to +50℃
• Cable and connector can be run over, tested to 2500kg (2.5 tons) on concrete with only superficial damage